How to Use the 12th Project Physical Seven

How to Use the 12th Project Physical Seven

The 12th Project Modules should only be used when you are relaxed and not stressed. 

Use each of the physical seven modules twice a day for at least 3 days to have maximum cleanliness and balance.

  1. Fill a glass with 3-4 ounces of water (or run your bath or shower). 
  2. Put your attention on the water and then click the button labeled "User Preparation." This runs for 8 seconds and is used to override any limiting belief systems programmed in your subconscious mind. Thus begins the establishing of your quantum communication link. 
  3. Put your attention on the water again and click on the button labeled "Water Preparation." Because water carries the memory of everywhere it’s traveled, it is important to remove any memory imprints from it. This part of the software runs for 8 seconds and deprograms or 'blank-slates' the water medium. 
  4. The heart of the program is the button labeled, "Nucleate Chakra." This is where the connection to the quantum realm happens. Put your attention on the water, and click the button (it runs for 18 seconds).
  5. Once you have clicked the button move your attention to the chakra you are trying to clear and heal.
  6. Drink the water (or bathe/shower with it) and you instantly feel the chakra start to open and moveenergy through it. Once you have worked on the desired chakra for the recommend time you will start to notice loads of things happening.
  7. There are many great articles on the internet that explain the benefits of having your chakras cleaned and balanced. Below are some links to some of the better resources. 



Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk